Español
Portugues
Beltwin skiving machine enables the ends of transmission belts to be narrowed for top quality splicing. Then connect two ends of belt by press machine. Meet your demands for different belt in different thickness.
- Manual type
- Meet your demands for different belt in different thickness
- For belt thickness: 1-5mm
- Rotational speed: 650r/min
- Working voltage: 220V single phase
Technical Datasheet
| Belt Skiving Machine Specification | ||||||
| Model | SD-150 | SD-200 | SD-300 | SD-400 | SD-500 | SD-600 |
| Power | 750W | 1100W | 2200W | 2200W | 3300W | 3300W |
| Max Belt Width | 200mm | 200mm | 300mm | 400mm | 500mm | 600mm |
| Skiving Length | 100mm | 150mm | 150mm | 150mm | 150mm | 150mm |
| Machine Body Note | Aluminum alloy | Aluminum alloy | Aluminum alloy | Aluminum alloy | Aluminum alloy | Aluminum alloy |
| / | With frequency inverter,speed control. | |||||
- Operation: Manual adjust
- Table inclination can be adjusted in order to control the chamfer length, depending on the material thickness.
- Meet can meet your demands for different belt in different thickness.
- Fast and simple replacement of the abrasive band
- Belts can be skived one at a time or lined up to skive several at once.
- With frequency inverter of the speed control
- Can adjust the angle of working table.
The belt after skiving
Send Message
Related Products
Model NO. Semi-automatic PU Round V-Belt Splicing Kit
Model NO. Rodillo neumático encaje
Model NO. 1600W Heating Gun
Model NO. SM-M 80-250
Model NO. Heating Clamps for Melt Splices
Model NO. Maximum belt width :100/200mm
